Products

DESCRIPTION

Basic Info

Property	Water-Solution
Auxiliary System	Water Type Coating Auxiliary Agent
Usage Stage	Manufacturing Stage
Application 1	Latex Paint
Application 2	Stone-Liking Paint
Application 3	Colorful
Application 4	Ink
Application 5	Adhesive
Transport Package	200kgs/Drum
Specification	Modified polysiloxane defoamer
Trademark	DR
Origin	China
HS Code	3402130090
Production Capacity	1500mts/Month

Product Description

Antifoam AgentProduct Description

PRODUCT DESCRIPTION

DR-K308 defoamer is a modified polysiloxane emulsion product with long-lasting defoaming properties without affecting the gloss of the system. It is mainly recommended for water-based building interior and exterior wall coatings (flat, semi-gloss), water-based wood paints, water-based inks (high-gloss), water-based adhesives, paper coating, and emulsion polymerization. FRATURES The substance components of the antifoam do not contain the substances listed in the SVHC list of the REACH Regulation. Antifoaming agent component does not contain NP, APEO. The antifoam substance component does not contain the substances contained in the ROSH Directive (Restriction of the use of certain hazardous substances in electrical and electronic equipment).COMPOSITION Composed of modified polysiloxane and hydrophobic particles.
Product Parameters

TYPICAL PROPERTIES

Index	Result	Test Method
Appearance	White or slightly yellow uniform emulsion liquid,no sediment, no visible mechanical impurities	GB/T 26527-2011
Viscosity	3000-8000	GB/T 5561-2012
pH	6.5-7.5	pH Indicator Paper 1% in water
Nonvolatile Content(%)	29.0±1.0	GB/T 26527-2011

Note:The information above is for reference and shall not be deemed as a technical indicator. HOW TO USE This product is a mixture. There may be deposits or layering during shelf life, and it is normal. Before using, stir the product evenly at 30 to 60 rpm and it will not affect the performance of the product. This product can't be diluted with water. If it is diluted with water, this product may appear stratified; finally lead to the cost increase, DERUN company accepts no responsibility. It is suggested that the product is added in a place where the defoamer can disperse easily. The addition amount of defoaming agent accounts for 0.1-1% of the total formula amount
Packaging & Shipping

PACKAGE AND STORAGE

The product is available in 25-kg, 200-kg or 1000kg plastic buckets. This product can be stored as a normal chemical, away from heat sources and direct sunlight. Don't add acid, alkali, or salt to this product. Ensure the container is sealed after using. This product may freeze under 0ºC (32ºF); if this happens, stir well after defrosting the antifoam at a rate of 30 to 60 rpm. In these cases, stirring will not affect the performance of the product if carried out at the recommended speed. If burning, put out the fire according to the extinguishing method for general petroleum products .When stored between 5 and 40ºC (41-104ºF) in the original unopened containers, the product is usable 9 months from the date of manufacture. LIMITIED WARRANTY INFORMATION Please read carefully: The information contained herein is offered from experiences and knowledge in our company. The proposed application method of this product is for reference only. If it is not sure that the product is safe, effective, and fully satisfactory for the intended end use, please contact the dealer or DERUN directly. It is recommended that the customer conduct preliminary tests, ensuring product safety and effectiveness. Each customer has different system conditions. Please get in contact with the DERUN Company if you are uncertain that your product is meeting guarantees. If the product is not in accordance with product standards, DERUN will assume liability and refund the payment of goods or replace the product. Our company can provide the SDS on request.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Company Profile

Anhui Derun Import & Export Trading established in 2017, ISO9001: 2015 certified company.

We focus on sourcing China origin excellent quality resins and additives which are widely used for printing ink. Current products mainly divide into 3 series.

I. Monomers, Oligomers and Photoinitiator for UV ink.

II. Resins for solvent based ink.

III. Resins for water based ink.

We aim to provide solution for the purpose of improving printing ink glossiness, adhesion, leveling, fast drying, yellow resistance, weather resistance and pigment wettability.

Consistent and stable quality are the core responsibility of our company. From initial sample analysis to formal commercial cooperation, we conduct strict quality control policy. Our lab team are equipped with advanced analysis instruments and trained engineers in order to provide accurate data analysis and technical solutions.

Professional, quality customer service is the core competitiveness of our company. Our experienced team is good at understanding customer's demand and quickly identify the most suitable products for our customers. Our logistic team specialize in sea shipment, air shipment and railway shipment to make sure our materials deliver to customers in perfect condition.

 

We expect to be your most trustworthy bunsiness partner, creat brighter future together.

 

Our Advantages

Almost 20 years history of import and export trade process guarantee that our product quality is stable and consistent.

Certifications

FAQ

FAQ

Q1. How can I get sample to test ?
A: 300gram free samples available. Even free of express charge .

Q2. How about delivery?
A: 10-20 days

Q3. What payment terms are available ?
A: TT, LC, DP, DA, WESTERN UNION, PAYPAL.

Q4. How confirm specification ?
A: Send inquiry mention CAS Number, application and TDS.