Blog

Oct 15, 2024

A tautomerized ligand enabled meta selective C–H borylation of phenol | Nature Communications

Nature Communications volume 14, Article number: 6906 (2023) Cite this article 13k Accesses 14 Citations 45 Altmetric Metrics details Remote meta selective C–H functionalization of aromatic compounds

Nature Communications volume 14, Article number: 6906 (2023) Cite this article

13k Accesses

14 Citations

45 Altmetric

Metrics details

Remote meta selective C–H functionalization of aromatic compounds remains a challenging problem in chemical synthesis. Here, we report an iridium catalyst bearing a bidentate pyridine-pyridone (PY-PYRI) ligand framework that efficiently catalyzes this meta selective borylation reaction. We demonstrate that the developed concept can be employed to introduce a boron functionality at the remote meta position of phenols, phenol containing bioactive and drug molecules, which was an extraordinary challenge. Moreover, we have demonstrated that the method can also be applied for the remote C6 borylation of indole derivatives including tryptophan that was the key synthetic precursor for the total synthesis of Verruculogen and Fumitremorgin A alkaloids. The inspiration of this catalytic concept was started from the O–Si secondary interaction, which by means of several more detailed control experiments and detailed computational investigations revealed that an unprecedented Bpin shift occurs during the transformation of iridium bis(boryl) complex to iridium tris(boryl) complex, which eventually control the remote meta selectivity by means of the dispersion between the designed ligand and steering silane group.

Transition metal-catalyzed C–H bond activation and functionalization1,2,3,4,5,6,7,8,9,10 of aromatic compounds has been branded as one of the most significant chemical transformations. This has a profound impact in modern synthetic organic chemistry, ranging from laboratory methods to industrial deployment11,12. However, the key underlying principles for the success of the metal catalysis lies on the two important factors, such as: (i) design and synthesis of new generation ligand framework that can produce highly reactive catalyst system13,14 and (ii) substrates’ structure modifications15 by which site selectivity could be controlled by the steric crowding16,17,18,19,20 or various weak interactions21,22,23,24 of the aromatic compounds among several similar type of C–H bonds via the ligand–substrate pre-organization25,26. In recent times, many elegant approaches27 have been developed for the functionalization of proximal14,28,29,30 and remote C–H bonds1,3,31,32,33,34,35,36,37,38,39 of arenes by the design of either new ligand frameworks with an extended architectures featuring a weak coordinating functional groups40 or templates41 as well as transient mediators42 or transient directing groups43 attached with the substrates. While ligand having an extended architecture or template approaches are extremely important to functionalize the remotely located C–H bonds of arenes, but requirement of multi-step preparation of the linkers of the ligands and templates of the aromatic substrates significantly limit the wide application of the methods44.

Among numerous aromatic substrates, phenols are the most widespread aromatic compounds that acquired household products including several bioactive to important drug molecules45. Moreover, it is well-documented that 10% of the top 200 selling pharmaceuticals contain a phenol and several others employ phenols as synthetic intermediates46. Furthermore, phenols are also key components of the biopolymers melanin, lignin, resins, and polyphenylene oxides45,46,47. In industry, phenol is routinely used as a raw material to make numerous important components by means of its diversification via the synthetic manipulation45,46. Thus, direct functionalization of phenols would be a significant development for the rapid access of numerous important products47. In this context, traditional electrophilic substitution is an alternative method that affords variously substituted phenols (Fig. 1a)48. Employing this method, one can easily access ortho and para substituted phenol derivatives, although often remain a chance to have mixture of isomers. However, functionalization of the remote meta C-H bonds of phenols and getting meta functionalized phenols49 is extremely difficult because of the extreme inertness of the meta C–H bonds. Several pioneering approaches have been developed by Yu and others either using template method50,51,52 or transient directing group by Larrosa2 (Fig. 1a). But, achieving the meta functionalized products using these methods, it is essential to have specialized substrates that limits the application of the methods.

a Meta functionalization of phenol. b Present work of meta selective borylation of phenols at ambient temperature. c Conceptual background for ligand design. d Reaction design. e O–Si interaction. f Origin of meta selectivity on the basis of DFT calculation.

Having tremendous importance of catalytic C-H borylation53,54,55,56,57,58 in organic synthesis, we report here a concept for the meta selective C-H borylation of phenols through a unique ligand design strategy that has never been utilized in the C-H functionalization chemistry (Fig. 1b). Literature reports revealed59,60 that the most common structural motif for the O–Si interaction can be found in the amide skeleton, where a filled p-orbital of carbonyl oxygen atom interact with the vacant d-orbital of the tetracoordinated silicon atom consisting of at least one electronegative atom (Fig. 1c). Inspired from this background reports59,60, we initially proposed a hypothesis where phenol is protected with an easily removable silane group that will meet all the necessary criteria for the weak O–Si interaction with 2-pyridone moiety having amide skeleton. The designed ligand (PY-PYRI) consists of two parts, one part is the simple pyridine unit (PY) and the other one is a 2-pyridone unit (PYRI)61,62,63,64, which was redesigned by the skeletal modification of the bipyridine core structure (Fig. 1d). Based on the above-mentioned findings, we anticipated that the designed PY-PYRI ligand may control the meta selectivity owing to the following two reasons. Firstly, in presence of [Ir(cod)OMe]2, the ligand (PY-PYRI) will generate a complex (Int-1). Secondly, the p-orbital of the oxygen atom of the 2-pyridone unit will interact with the vacant d-orbital of the tetracoordinated silicon atom of the substrate through TSO-Si (Fig. 1e). While experimental observations indicated that the secondary O–Si interaction was the key to control the remote meta selectivity, surprisingly, what we found from the computational calculations is somewhat different from our anticipated O–Si interaction. It was revealed that the Int-1 derived from the PY-PYRI ligand, in presence of di-boron reagent generated iridium bis(boryl) complex (Int-2), which underwent an unprecedented Bpin shift due to the close proximity of the 2-pyridone carbonyl oxygen atom and Bpin group attached with iridium atom. A dispersion force was observed by the ligand containing OBpin group and substituent (R = tBu) of the PY-PYRI ligand that creates a suitable pocket for the phenol bearing tri-isopropyl group for the meta selective borylation reactions (Fig. 1f).

The investigation of this meta selective C-H borylation started with phenol (1a) using the standard dtbpy ligand under the iridium-catalyzed conditions at 80 °C in THF solvent, where free phenol does not participate in the reaction (Fig. 2a). On the other hand, performing the borylations with several steering groups such as, OMe, OBpin, acetyl, pivalate, OBoc, carbamate and other sulfonate groups proved to be nonselective. Interestingly, when the reaction was examined using SiMe3 as steering group (1k), it gave 81% meta selectivity with dtbpy ligand. The selectivity was further enhanced to 84% upon changing the steering group from SiMe3 to SiiPr3 group (1l).

a Optimization of steering group. b Ligand optimization. c Deleterious result with other silyl groups. d Importance of O–Si linkage towards meta selectivity. e Importance of [Si] towards meta selectivity. Reactions are on 0.2 mmol scales. aConversion was reported. See SI for details.

After identifying the best choice of steering group (SiiPr3) for meta borylation of phenol, we then studied the same reaction with several bipyridine ligands (Fig. 2b). It was observed that while bipyridine ligand (L1) afforded same type of selectivity similar to the dtbpy ligand with less conversion, no reaction occurred with 1,10-phenanthroline (L2). Testing the reaction with 4,4’-dimethyl bpy (L3) also resulted in 86% meta selectivity with 81% conversion. As expected, due to steric crowding ligand (L4) bearing 6,6’-disubtituted methyl group failed to undergo the reaction. Notably, while a monosubstituted ligand (L5) having a methoxy group resulted in 86% meta borylation with 36% conversion, the ligand (L6) containing a hydroxy group that can undergo tautomerization provided excellent meta selectivity (90%) with improved conversion (64%). Surprisingly, introducing two hydroxy groups into the ligand (L7), no reaction occurred. To see the electronic effect of the ligand, we performed the borylation with (L9) ligand that yielded minor improvement (91% meta selectivity, 68% conversion) with respect to the ligand (L6). Remarkably, when the reaction was conducted with the ligand (L9) having a tert-butyl group, it provided 94% meta selectivity along with excellent conversion of the meta borylation (95%).

Having established the optimized reaction conditions employing the tri-isopropyl silyl steering group, we then became interested in other silyl steering groups (1k, 1m–1q) which exhibited deleterious outcomes for the meta borylation (Fig. 2c). Moreover, we found that the essential criteria for achieving high level of meta selectivity is that the substrate must have an O–Si linkage, because substrates having C–Si linkage (1r, 1s) afforded non-selective borylation (Fig. 2d). Furthermore, to sense the importance of silyl group [Si] was replaced with the [C] (1t) that also resulted in non-selective borylation reactions (Fig. 2e). Thus, it may be stated that for achieving high degree of meta selective borylation, it is essential that substrates should have silane steering group along with the most important 2-pyridone ligand (L9: Py-PYRI).

To this end, we were curious about the catalyst structure with the designed tautomeric ligand (L9: PY–PYRI) for the meta selective borylation. Accordingly, to sense the binding behavior of the developed ligand system we performed a stoichiometric reaction between the ligand (L9) and [Ir(cod)OMe]2, which gave a complex (3) that have 2-pyridone type unit confirmed by X-ray and NMR spectroscopy (Fig. 3a). To know whether this complex (3) is catalytically active or not, it was then tested as a catalyst for the reactions of the substrates (1l) and (4a), which afforded highly meta selective borylation with excellent conversions (Fig. 3b). Moreover, testing the stability of the catalyst [3: Ir(cod)(PY-PYRI)] we observed that it is highly stable that can even be stored in open air for several months.

a Catalyst synthesis. b Test of reactivity of catalyst 3. c DFT calculation: Active catalyst formation. d Experimental support of OBpin formation. e Test of reactivity of L10. f Further improved reaction conditions. Reactions are on 0.2 mmol scales. aConversion was reported. See SI for details.

To show insights into the reaction mechanism and the origin of meta-selectivity, detailed DFT calculations were conducted. The proposed reaction pathway is shown in Fig. 3c, in which L6 was used as the model ligand. [Ir(OMe)(cod)]2 firstly reacts with the ligand and forms L6Ir(η4-cod) (INT1) as a starting species. When B2pin2 was the only boron reagent, a B-B oxidative addition to INT1 occurs via TS1, giving L6Ir(η4-cod)(Bpin)2 (INT2). Then, unexpectedly, the oxygen in the ligand attacks a Bpin group on the iridium center and eventually undergoes an intramolecular Bpin-shift via TS2. With a free energy barrier of only 4.0 kcal/mol, this tautomerization step proceeds very quickly and delivers a more stable (L6Bpin)Ir(η4-cod)(Bpin) (INT3). Next, INT3 partly dissociates cod to generate an empty site for incoming B2pin2, which then undergoes another B-B oxidative addition through TS3 to form (L6Bpin)Ir(η2-cod)(Bpin)3 (INT4). Finally, the dissociation of cod yields (L6Bpin)Ir(Bpin)3 (INT5), which we believe to be the active catalyst in C-H borylation of the phenol silyl ethers. To support this Bpin-shift process, we prepared the intermediate ligand L10 from the ligand L9 with HBpin in presence of a catalytic amount of iridium catalyst (Fig. 3d). The intermediate ligand L10 was then employed in the reaction using the substrate (1l) at room temperature that resulted in an improved result of 97% meta selectivity with full conversion to the borylated product (2l) (Fig. 3e). From these experimental observations, we realized that if we used catalytic amount of HBpin in the reaction mixture with ligand L9, it could give better selectivity and outcomes. As expected, we noticed that the use of ligand L9 in presence of 5.0 mol% HBpin afforded 97% meta selectivity with 100% conversion of 1l at room temperature (Fig. 3f).

With the optimized reaction conditions of meta selective borylation using L9 (PY-PYRI) as ligand and Si(iPr)3 as steering group at room temperature, we next performed the iridium-catalyzed meta borylation of a variety of phenols that afforded excellent meta selectivity and yields of the isolated borylated products (Fig. 4). For example, we first tested 2-chlorophenol (4a) for the borylation reaction, while our designed ligand (L9) gave high meta selectivity (m/p = 96/4), traditional dtbpy ligand provided poor meta selectivity (m/p = 63/37), which clearly demonstrated the utility of the designed (L9: PY-PYRI) ligand. Other 2-substituted phenols, such as 2-bromo (4b) and 2-iodo (4c) afforded high meta selectivity that have great synthetic values owing to the two different types of handles on the phenols.

Reactions are in 0.5 mmol scale. aConversion was reported. b1.5 equiv. B2pin2 was used. cReaction is carried out at 80 oC. dReactions are carried out at 50 oC. e2.0 equiv. B2pin2 was used. See SI for details.

Likewise, phenols bearing various alkyl chain ranging from methyl to pentyl (4d–4f) at the 2-positions along with trifluoromethyl (4g), isopropyl (4h) and trifluoromethoxy (4i) smoothly underwent meta borylation irrespective of the nature of the substituent. Amino phenol (4j), substrate of momentous importance for the chemical and pharmaceutical industries65 is borylated with high meta selectivity (m/p = 99/1) without borylation next to the amino group, which is known to give ortho borylation under iridium-catalyzed borylation conditions via in situ generation of NHBpin group66. Thioether (4k) that usually directs borylation at the ortho position67 also underwent borylation with good meta selectivity. We observed that phenols containing functional groups such as cyano (4l) and Bpin (4m) resulted very high meta selectivity of 99% and 98% respectively without any disturbance by the electronics of these substituents. Also, cyclic amine (4n), cyclohexyl (4o), ketomethyl (4p) and homologous ester (4r) afforded high level of meta selectivity and tolerated well under the employed reaction conditions. The utility of the developed PY-PYRI (L9) ligand was further highlighted when substrates were employed in the reactions conditions with dtbpy ligand and all resulted in non-selective borylation reactions. Amide functionalities (4r and 4s) that are known to undergo numerous synthetic transformations68 exhibited excellent meta selective borylation. Borylation of phenols having CF3 (4g) and CN (4l) substituents at the ortho position afforded exclusively meta borylation, the same substituents at the meta position of phenols (4t and 4u) also gave meta selective borylation, which indicated the generality of the developed method. Moreover, fluoro-substituted arene, which typically gives borylation next to the fluorine atom under standard iridium-catalyzed conditions, in this case, 3-fluorophenol (4v) gave meta borylation as the major product. On the other hand, dtbpy gave non-selective borylation reaction of 4v bearing meta fluoro substituents. Several disubstituted phenols (4w–4af) were also examined under the developed conditions that reacted smoothly to afford variously substituted meta borylated products in high yields. 2,2′-Biphenol, compound of paramount importance in medicinal chemistry as well as in chemical industry69 can selectively be mono- and diborylated (5ah and 5ag) by tuning the amount of boron reagent. On the other hand, dtbpy gave complex mixture for the borylation of 4ag and this result again highlighted the importance of PY-PYRI ligand. A bulky substituent at the ortho positions (4ah) did not hamper the reaction that gave 98% meta borylated product with 90% isolated yield.

Next, we focused on the meta borylation of those phenols bearing a substituent at the para position (Fig. 5). Because, borylation at the remote meta position in presence of a para substituent remains an extraordinary challenge due to the steric reason. Moreover, we selected those substituents at the para position that already provided exclusive meta borylation of phenols when they were located at either ortho or meta positions. The reason for this selection is mainly to observe the overall effects of the borylation by the same substituents. For the testification, we begun with the 4-methyl phenol (6a) that afforded 91% meta selective borylation. Increasing the chain length from small methyl group to the relatively bulkier alkyl groups such as, ethyl (6b), pentyl (6c), hexyl (6d) and isopropyl (6e), the borylation underwent smoothly with further enhancement of the meta selectivity from 91% to 100%. Para-substituted ethers and thioethers bearing electronically different substituents (6f–6j) reacted with 100% meta selectivity, which revealed that the scope of the meta borylation is very general regardless of the nature of the substituents. While 2-CN, 3-CN as well as 2-CF3 and 3-CF3 bearing phenols resulted in excellent meta borylation, the same substituents at the para position reacted to yield 100% meta borylation. Likewise, we also observed that chloro (6m) and bromo (6n) containing phenols reacted to give the meta borylation products solely irrespective of their position in the arene. Moreover, it has been found that the phenols featuring bulky substituents at the para position (6o–6r) also gave exclusively meta borylation, although conversion was moderate in case of the cyclohexyl group. In all cases, dtbpy results were compared and gave somewhat bad result with compared to developed PY-PYRI (L9) ligand.

Reactions are in 0.5 mmol scale. aConversions were reported. See SI for details.

In 2015, Baran et al. reported70 the first total synthesis of Verruculogen and Fumitremorgin A enabled by ligand-controlled C–H borylation as the key step of TIPS protected tryptophan. We were curious if our designed ligand system could provide the remote C6 borylation of TIPS protected indoles and tryptophan (Fig. 6a). For that reason, we performed borylation of TIPS-protected tryptophan (8a) (synthetic key precursor of bioactive alkaloids Verruculogen and Fumitremorgin A) which provided C6 borylation with 98% selectivity with excellent conversions at 60 °C. Moreover, large-scale synthesis of (8a) smoothly underwent under the developed reaction conditions without hampering the selectivity. We also found that other indole derivatives (8b and 8c) and carbazole (8d) easily underwent remote borylation affording excellent selectivity and conversion. This developed method provided a simple way to borylate the 3-substituted indoles derivatives that might be beneficial for the total synthesis or the late-stage functionalization of several bioactive molecules.

a C6 borylation of indoles. b Late-stage meta C–H borylation. c Removal of silane. Reactions are in 0.5 mmol scale. aConversions were reported. b2.0 equiv. B2pin2. See SI for details.

Late-stage functionalization71 of complex bioactive and medicinally important molecules by the site selective C–H activation is a powerful method for the development of new drug candidates72. In this context, introducing a boron functionality into the bioactive and medicinally important molecules would further enhance the identification of new lead molecules not only for the enormous importance of the boron-bearing small molecules73 but also for the uniqueness of the boron group towards the diverse derivatization towards numerous other functional groups. Thus, we tested our developed method for several commercially available bioactive and drug molecules (Fig. 6b). For example, cannabinoid core (10a: used as a psychoactive drug), methyl salicylate derivatives (10b: an anti-inflammatory and analgesic agent), tyrosol derivatives (10c: an antioxidant), eugenol derivatives (10d: a flavoring agent), sesamol derivatives (10e: an antioxidant), naproxen derivatives (10f: a nonsteroidal anti-inflammatory drug, NSAID), deoxyarbutin derivatives (10g: used for treatment of hyperpigmentation disorders) and homosalate (10h: used as a sunscreen) were meta borylated with high yield and selectivity. Moreover, parallel reactions were carried out with the dtbpy ligand for 10a–h substrates and resulted comparatively less conversions or non-selective borylation reactions than the developed PY-PYRI (L9) ligand. The steering silane group from the borylated phenols has been removed under a very mild reaction conditions at room temperature (ethylene glycol, KF, 1 h) that afforded the meta borylated phenols in high yields (Fig. 6c). Notably, the meta borylated phenols can further be transformed to a number of substituted phenols/resorcinols that are difficult to prepare by otherwise.

At the end, we are curious about the origin of meta selectivity in the C-H borylation. Therefore, a detailed DFT calculations were carried out. It is found that the active catalyst INT5 follows an Ir(III)-Ir(V) catalytic cycle through C-H oxidative addition (via TS4-meta), C-B reductive elimination (via TS5), and catalyst regeneration (from INT7 to INT5), which is similar to those reported for bipyridine ligands (Fig. 7a)57,74. An evaluation of the regioselectivity-determining C-H activation process showed that the meta-C-H activation of model substrate 4a’ (2Cl-PhOSiMe3) through TS4-meta is preferred by 0.7 kcal/mol over its para-C-H activation through TS4-para. This tendency agrees with our experiments. The activation free energy of the rate-determining C-H activation is computed to be 28.8 kcal/mol. Since dispersions can significantly stabilize the meta-C-H activation transition state (vide infra), the barrier for the real system is expected to be lower by 4–5 kcal/mol, making the reaction smoothly occur at room temperature.

a Ir(III)–Ir(V) catalytic cycle. b Our working model: Double dispersions determine meta selectivity. c Proofs for our working model. Computed at SMD(CyH)-M06/6-311 + G(d,p)//B3LYP/6-31 G(d). Relative free energies are given in kcal/mol. Atom colors in graphics: gray, C; white, H; red, O; blue, N; pink, B; light yellow, Si; green, Cl; brown, Ir.

Furthermore, the real ligand and substrate (L9 and 4a) were evaluated. Firstly, the transition states of meta- and para-C-H activation (TS8-meta and TS8-para) were located (Fig. 7b). To our delight, a much larger energetic preference of 4.4 kcal/mol was found for meta-C-H activation, in accordance with the observed excellent meta-selectivity. Scrutinizing the structures, TS8-para seems not to benefit from any significant interaction. However, for TS8-meta, we found that a double-dispersion model may explain the meta-selectivity (Fig. 7b, right). The OBpin group (highlighted in pink) in the ligand lies near the substrate, providing the first dispersion with the silyl group. In addition, the tert-butyl group (highlighted in blue) exerts the second dispersion on the other side. The Si(iPr)3 group (highlighted in green) has the best volume to fit into the constructed pocket, maximizing both dispersions. The multiple C-H···π interactions with the bipyridine rings may also help.

Our double-dispersion working model can be further supported by comparison with analogous ligands (Fig. 7c). The importance of the OBpin-originated first dispersion can be proved by considering the typical dtbpy as ligand. The computation showed that the silyl group lies far away from the ligand in TS9-meta without any dispersion mentioned above. Accordingly, an energetic preference of only 1.0 kcal/mol was predicted for meta-borylation, correlating with the poor experimental result (m:p = 63:37). The function of tert-butyl is verified by using L6 as ligand. The meta-C-H activation transition state TS10-meta has the same structural pattern as TS8-meta, showing the existence of the first dispersion. However, without the tert-butyl group, the second dispersion is absent, and the energy difference between the meta- and para-C-H activation shrinks to 2.9 kcal/mol. Experimentally, the meta-selectivity drops to 90:10. Finally, substrate 4a’, with a smaller silyl group, was calculated for reaction using ligand L9. The silyl group in TS11-meta is also placed as the same orientation as in TS8-meta, but the suboptimal size fitting results in a decreased energy difference of 1.6 kcal/mol, in agreement of the experiment (m:p = 79:21). In addition, more computational studies using different DFT methods are performed. When B3LYP (without dispersion correction) is used for single-point energy calculations, the computation contradicts with the experiments; when other functionals with dispersion terms are used, the results agree with the experiments (for details, see Supplementary Fig. 23). This further demonstrates the importance of the dispersion effect in the reaction system. Therefore, the synergistic effect of two optimal dispersions contributes to the observed excellent meta-selectivity.

In conclusion, we report a new class of ligand and catalyst that has demonstrated remarkable efficiency for the remote meta selective borylation of phenols featuring all types of substitutions at the arene ring. In addition, we have seen that our developed ligand system is beneficial for the remote C6-borylation of indole derivatives including tryptophan which is a synthetic precursor of bioactive alkaloids (Verruculogen and Fumitremorgin A). Several late-stage meta borylations have been showcased with bioactive and drug molecules that might be useful for repurposing medicines and identification of new lead drug candidates. Notably, while preliminary experimental findings indicated that a secondary O–Si interaction was the key element that controls the remote meta selectivity, detailed computational investigations along with more detailed experimental results revealed that an unprecedented Bpin shift was observed during the transformation of iridium bis(boryl) complex to iridium tris(boryl) complex and developed tautomeric ligand behaves like bipyridine during the borylation reaction. The governing factors for the meta selective borylation is the combined dispersion of OBpin and tert-butyl group of the designed ligand which make a suitable pocket for the phenol bearing tri-isopropyl silane group that resulted in meta selective borylation of phenol. We anticipate that the designed ligand and catalyst will also find wide application in the context of other C–H functionalization reactions.

In an argon-filled glove box, a 5.0 mL Wheaton microreactor was charged with [Ir(cod)OMe]2 (4.97 mg, 1.5 mol%), ligand L9 (3.4 mg, 3.0 mol%), B2pin2 (127.0 mg, 1.0 equiv.), HBpin (3.2 mg, 5.0 mol%) and dry cyclohexane (2.0 mL) were added sequentially. The reaction mixture was stirred for 2 min at room temperature and then substrate (0.5 mmol) was added. The microreactor was capped with a Teflon pressure cap and stirred for 24 h at a particular mentioned temperature. After completion (judged by GC-MS), CyH was removed under reduced pressure and chromatographic separation with silica gel gave the meta-borylated product.

All data are available from the corresponding authors upon request. X-ray dataset for catalyst 3 is freely available at the Cambridge Crystallographic Data Centre under deposition number CCDC 2180880. All relevant data are available in this article and its Supplementary Information. The experimental procedures and characterization of all new compounds are provided in Supplementary Information file. Coordinates of the optimized structures are provided as source data. Source data are provided with this paper.

Zhang, Z., Tanaka, K. & Yu, J.-Q. Remote site-selective C–H activation directed by a catalytic bifunctional template. Nature 543, 538–542 (2017).

Article ADS CAS PubMed PubMed Central Google Scholar

Luo, J., Preciado, S. & Larrosa, I. Overriding ortho-para selectivity via a traceless directing group relay strategy: the meta-selective arylation of phenols. J. Am. Chem. Soc. 136, 4109–4112 (2014).

Article CAS PubMed Google Scholar

Sinha, S. K. et al. Toolbox for distal C–H bond functionalizations in organic molecules. Chem. Rev. 122, 5682–5841 (2022).

Article CAS PubMed Google Scholar

Lyons, T. W. & Sanford, M. S. Palladium-catalyzed ligand-directed C–H functionalization reactions. Chem. Rev. 110, 1147–1169 (2010).

Article CAS PubMed PubMed Central Google Scholar

Davies, H. M. L., Bois, J. D. & Yu, J.-Q. C–H functionalization in organic synthesis. Chem. Soc. Rev. 40, 1855–1856 (2011).

Article CAS PubMed Google Scholar

Arockiam, P. B., Bruneau, C. & Dixneuf, P. H. Ruthenium (II)-catalyzed C–H bond activation and functionalization. Chem. Rev. 112, 5879–5918 (2012).

Article CAS PubMed Google Scholar

Sambiagio, C. et al. A comprehensive overview of directing groups applied in metal-catalysed C–H functionalisation chemistry. Chem. Soc. Rev. 47, 6603–6743 (2018).

Article CAS PubMed PubMed Central Google Scholar

Crabtree, R. H. & Lei, A. Introduction: CH activation. Chem. Rev. 117, 8481–8482 (2017).

Article CAS PubMed Google Scholar

Shilov, A. E. & Shul’pin, G. B. Activation of C−H bonds by metal complexes. Chem. Rev. 97, 2879–2932 (1997).

Article CAS PubMed Google Scholar

Rogge, T. et al. C–H activation. Nat. Rev. Methods Primers https://doi.org/10.1038/s43586-021-00041-2 (2021).

Yamaguchi, J., Yamaguchi, A. D. & Itami, K. C-H bond functionalization: emerging synthetic tools for natural products and pharmaceuticals. Angew. Chem. Int. Ed. 51, 8960–9009 (2012).

Article CAS Google Scholar

Dalton, T., Faber, T. & Glorius, F. C–H activation: toward sustainability and applications. ACS Cent. Sci. 7, 245–261 (2021).

Article CAS PubMed PubMed Central Google Scholar

Liao, K. et al. Design of catalysts for site-selective and enantioselective functionalization of non-activated primary C–H bonds. Nat. Chem. 10, 1048–1055 (2018).

Article CAS PubMed Google Scholar

Hoque, M. E., Hassan, M. M. M. & Chattopadhyay, B. Remarkably efficient iridium catalysts for directed C(sp2)–H and C(sp3)–H borylation of diverse classes of substrates. J. Am. Chem. Soc. 143, 5022–5037 (2021).

Article CAS PubMed Google Scholar

Hoveyda, A. H., Evans, D. A. & Fu, G. C. Substrate-directable chemical reactions. Chem. Rev. 93, 1307–1370 (1993).

Article CAS Google Scholar

Cheng, C. & Hartwig, J. F. Rhodium-catalyzed intermolecular C–H silylation of arenes with high steric regiocontrol. Science 343, 853–857 (2014).

Article ADS CAS PubMed Google Scholar

Ramadoss, B., Jin, Y., Asako, S. & Ilies, L. Remote steric control for undirected meta-selective C–H activation of arenes. Science 375, 658–663 (2022).

Article ADS CAS PubMed Google Scholar

Cho, J. Y., Tse, M. K., Holmes, D., Maleczka, R. E. & Smith, M. R. Remarkably selective iridium catalysts for the elaboration of aromatic C-H bonds. Science 295, 305–308 (2002).

Article ADS CAS PubMed Google Scholar

Saito, Y., Segawa, Y. & Itami, K. para-C–H borylation of benzene derivatives by a bulky iridium catalyst. J. Am. Chem. Soc. 137, 5193–5198 (2015).

Article CAS PubMed Google Scholar

Mondal, A., Chen, H., Flämig, L., Wedi, P. & Gemmeren, M. V. Sterically controlled late-stage C–H alkynylation of arenes. J. Am. Chem. Soc. 141, 18662–18667 (2019).

Article CAS PubMed Google Scholar

Kuninobu, Y., Ida, H., Nishi, M. & Kanai, M. A meta-selective C-H borylation directed by a secondary interaction between ligand and substrate. Nat. Chem. 7, 712–717 (2015).

Article CAS PubMed Google Scholar

Fanourakis, A., Docherty, P. J., Chuentragool, P. & Phipps, R. J. Recent developments in enantioselective transition metal catalysis featuring attractive noncovalent interactions between ligand and substrate. ACS Catal. 10, 10672–10714 (2020).

Article CAS PubMed PubMed Central Google Scholar

Zhang, T. et al. A directive Ni catalyst overrides conventional site selectivity in pyridine C–H alkenylation. Nat. Chem. 13, 1207–1213 (2021).

Article ADS CAS PubMed PubMed Central Google Scholar

Hoque, M. E., Bisht, R., Haldar, C. & Chattopadhyay, B. Noncovalent interactions in Ir-catalyzed C–H activation: L-shaped ligand for para-selective borylation of aromatic esters. J. Am. Chem. Soc. 139, 7745–7748 (2017).

Article CAS PubMed Google Scholar

Dydio, P. & Reek, J. N. H. Supramolecular control of selectivity in transitionmetal catalysis through substrate preorganization. Chem. Sci. 5, 2135–2145 (2014).

Article CAS Google Scholar

Lou, Y., Wei, J., Li, M. & Zhu, Y. Distal ionic substrate–catalyst interactions enable long-range stereocontrol: access to remote quaternary stereocenters through a desymmetrizing Suzuki–Miyaura reaction. J. Am. Chem. Soc. 144, 123–129 (2022).

Article CAS PubMed PubMed Central Google Scholar

Bisht, R. et al. Metal-catalysed C–H bond activation and borylation. Chem. Soc. Rev. 51, 5042–5100 (2022).

Article CAS PubMed Google Scholar

Ros, A., Fernandez, R. & Lassaletta, J. M. Functional group directed C–H borylation. Chem. Soc. Rev. 43, 3229–3243 (2014).

Article CAS PubMed Google Scholar

Kawamorita, S., Ohmiya, H., Hara, K., Fukuoka, A. & Sawamura, M. Directed ortho borylation of functionalized arenes catalyzed by a silica-supported compact phosphine−iridium system. J. Am. Chem. Soc. 131, 5058–5059 (2019).

Article Google Scholar

Boebel, T. A. & Hartwig, J. F. Silyl-directed, iridium-catalyzed ortho-borylation of arenes. a one-pot ortho-borylation of phenols, arylamines, and alkylarenes. J. Am. Chem. Soc. 130, 7534–7535 (2008).

Article CAS PubMed Google Scholar

Bisht, R. & Chattopadhyay, B. Formal Ir-catalyzed ligand-enabled ortho and meta borylation of aromatic aldehydes via in situ-generated imines. J. Am. Chem. Soc. 138, 84–87 (2016).

Article CAS PubMed Google Scholar

Yang, L., Uemura, N. & Nakao, Y. meta-Selective C–H borylation of benzamides and pyridines by an iridium–lewis acid bifunctional catalyst. J. Am. Chem. Soc. 141, 7972–7979 (2019).

Article CAS PubMed Google Scholar

Davis, H. J., Madalina, M. T. & Phipps, R. J. Ion pair-directed regiocontrol in transition-metal catalysis: a meta-selective C–H borylation of aromatic quaternary ammonium salts. J. Am. Chem. Soc. 138, 12759–12762 (2016).

Article CAS PubMed Google Scholar

Chaturvedi, J., Haldar, C., Bisht, R., Pandey, G. & Chattopadhyay, B. Meta selective C– H borylation of sterically biased and unbiased substrates directed by electrostatic interaction. J. Am. Chem. Soc. 143, 7604–7611 (2021).

Article CAS PubMed Google Scholar

Mihai, M. T., Williams, B. D. & Phipps, R. J. Para-selective C-H borylation of common arene building blocks enabled by ion-pairing with a bulky countercation. J. Am. Chem. Soc. 141, 15477–15482 (2019).

Article CAS PubMed PubMed Central Google Scholar

Bastidas, J. R. M., Oleskey, T. J., Miller, S. L., Smith, M. R. & Maleczka, R. E. Para-selective, iridium-catalyzed C–H borylations of sulfated phenols, benzyl alcohols, and anilines directed by ion-pair electrostatic interactions. J. Am. Chem. Soc. 141, 15483–15487 (2019).

Article PubMed Central Google Scholar

Chang, W. et al. Computationally designed ligands enable tunable borylation of remote C-H bonds in arenes. Chem. 8, 1775–1788 (2022).

Article CAS Google Scholar

Wang, Y. et al. Diversification of aryl sulfonyl compounds through ligand controlled meta- and para-CH borylation. Angew. Chem. Int. Ed. 61, e202206797 (2022).

Article CAS Google Scholar

Lu, S. et al. para-Selective C–H borylation of aromatic quaternary ammonium and phosphonium salts. Angew. Chem. Int. Ed. 61, e202201285 (2022).

Article CAS Google Scholar

Engle, K. M., Mei, T., Wasa, M. & Yu, J.-Q. Weak Coordination as a powerful means for developing broadly useful C–H functionalization reactions. Acc. Chem. Res. 45, 788–802 (2012).

Article CAS PubMed Google Scholar

Leow, D., Li, G., Mei, T.-S. & Yu, J.-Q. Activation of remote meta-C–H bonds assisted by an end-on template. Nature 486, 518–522 (2012).

Article ADS CAS PubMed PubMed Central Google Scholar

Shi, H., Herron, A. N., Shao, Y., Shao, Q. & Yu, J.-Q. Enantioselective remote meta-C–H arylation and alkylation via a chiral transient mediator. Nature 558, 581–585 (2018).

Article ADS CAS PubMed PubMed Central Google Scholar

Gandeepan, P. & Ackermann, L. Transient directing groups for transformative C–H activation by synergistic metal catalysis. Chem 4, 199–222 (2018).

Article CAS Google Scholar

Meng, G. et al. Achieving site-selectivity for C–H activation processes based on distance and geometry: a carpenter’s approach. J. Am. Chem. Soc. 142, 10571–10591 (2020).

Article CAS PubMed PubMed Central Google Scholar

Scott, K. A., Cox, P. B. & Njardarson, J. T. Phenols in pharmaceuticals: analysis of a recurring motif. J. Med. Chem. 65, 7044–7072 (2022).

Article CAS PubMed Google Scholar

Bartolomei, B., Gentile, G., Rosso, C., Filippini, G. & Prato, M. Turning the light on phenols: new opportunities in organic synthesis. Chem. Eur. J. 27, 16062–16070 (2021).

Article CAS PubMed Google Scholar

Quideau, S., Deffieux, D., Douat-Casassus, C. & Pouységu, L. Plant polyphenols: chemical properties, biological activities, and synthesis Angew. Chem. Int. Ed. 50, 586–621 (2011).

Huang, Z. & Lumb, J.-P. Phenol-directed C–H functionalization. ACS Catal. 9, 521–555 (2019).

Article CAS Google Scholar

Maraswami, M., Hirao, H. & Loh, T.-P. Copper-catalyzed meta-selective arylation of phenol derivatives: an easy access to m-aryl phenols. ACS Catal. 11, 2302–2309 (2021).

Article CAS Google Scholar

Dai, H.-X., Li, G., Zhang, X.-G., Stepan, A. F. & Yu, J.-Q. Pd(II)-catalyzed ortho- or meta-C–H olefination of phenol derivatives. J. Am. Chem. Soc. 135, 7567–7571 (2013).

Article CAS PubMed PubMed Central Google Scholar

Wan, L., Dastbaravardeh, N., Li, G. & Yu, J.-Q. Cross-coupling of remote meta-C–H bonds directed by a U-shaped template. J. Am. Chem. Soc. 135, 18056–18059 (2013).

Article CAS PubMed PubMed Central Google Scholar

Xu, J. et al. Sequential functionalization of meta-C–H and ipso-C–O bonds of phenols. J. Am. Chem. Soc. 141, 1903–1907 (2019).

Article CAS PubMed PubMed Central Google Scholar

Iverson, C. N. & Smith, M. R. III. Stoichiometric and catalytic B-C bond formation from unactivated hydrocarbons and boranes. J. Am. Chem. Soc. 121, 7696–7697 (1999).

Ishiyama, T. et al. Mild iridium-catalyzed borylation of arenes. High turnover numbers, room temperature reactions, and isolation of a potential intermediate. J. Am. Chem. Soc. 124, 390–391 (2002).

Article CAS PubMed Google Scholar

Mkhalid, I. A. I., Barnard, J. H., Marder, T. B., Murphy, J. M. & Hartwig, J. F. C–H activation for the construction of C–B bonds. Chem. Rev. 110, 89–931 (2010).

Article Google Scholar

Hartwig, J. F. Regioselectivity of the borylation of alkanes and arenes. Chem. Soc. Rev. 40, 1992–2002 (2011).

Article CAS PubMed Google Scholar

Boller, T. M. et al. Mechanism of the mild functionalization of arenes by diboron reagents catalyzed by iridium complexes. Intermediacy and chemistry of bipyridine-ligated iridium trisboryl complexes. J. Am. Chem. Soc. 127, 14263–14278 (2005).

Article CAS PubMed Google Scholar

Haldar, C., Hoque, M. E., Chaturvedi, J., Hassan, M. M. M. & Chattopadhyay, B. Ir-catalyzed proximal and distal C–H borylation of arenes. Chem. Commun. 57, 13059–13074 (2021).

Article CAS Google Scholar

Lazareva, N. F., Sterkhova, I. V. & Vashchenko, A. V. N-[difluoro(methyl)silyl]carboxamides: synthesis, structural features and theoretical estimating of Si←O dative bond energy. J. Mol. Struct. 1225, 129130 (2021).

Article CAS Google Scholar

Sohail, M. et al. Synthesis and hydrolysis–condensation study of water-soluble self-assembled pentacoordinate polysilylamides. Organometallics 32, 1721–1731 (2013).

Article CAS Google Scholar

Li, Z. et al. A tautomeric ligand enables directed C‒H hydroxylation with molecular oxygen. Science 372, 1452–1457 (2021).

Article ADS CAS PubMed PubMed Central Google Scholar

Chan, H. S. S., Yang, J.-M. & Yu, J.-Q. Catalyst-controlled site-selective methylene C–H lactonization of dicarboxylic acids. Science 376, 1481–1487 (2022).

Article ADS CAS PubMed Google Scholar

Wang, Z. et al. Ligand-controlled divergent dehydrogenative reactions of carboxylic acids via C–H activation. Science 374, 1281–1285 (2021).

Article ADS CAS PubMed PubMed Central Google Scholar

Li, Z., Park, H. S., Qiao, J. X., Kap-Sun Yeung, K.-S. & Yu, J.-Q. Ligand-enabled C–H hydroxylation with aqueous H2O2 at room temperature. J. Am. Chem. Soc. 144, 18109–18116 (2022).

Article CAS PubMed PubMed Central Google Scholar

Lajiness, J. P. et al. Design, synthesis, and evaluation of duocarmycin O-amino phenol prodrugs subject to tunable reductive activation. J. Med. Chem. 53, 7731–7738 (2010).

Article CAS PubMed PubMed Central Google Scholar

Preshlock, S. M. et al. A traceless directing group for C-H borylation. Angew. Chem. Int. Ed. 52, 12915–12919 (2013).

Article CAS Google Scholar

Li, H. L., Kuninobu, Y. & Kanai, M. Lewis acid-base interaction- controlled ortho-selective C-H borylation of aryl sulfides. Angew. Chem. Int. Ed. 56, 1495–1499 (2017).

Article CAS Google Scholar

Sun, W. et al. Chemodivergent transformations of amides using gem-diborylalkanes as pro-nucleophiles. Nat. Commun. 11, 3113 (2020).

Article ADS CAS PubMed PubMed Central Google Scholar

Hua, Z., Vassar, V. C., Choi, H. & Ojima, I. New biphenol-based, fine-tunable monodentate phosphoramidite ligands for catalytic asymmetric transformations. Proc. Natl Acad. Sci. USA 101, 5411–5416 (2004).

Article ADS CAS PubMed PubMed Central Google Scholar

Feng, Y. et al. Total synthesis of verruculogen and fumitremorgin A enabled by ligand-controlled C–H borylation. J. Am. Chem. Soc. 137, 10160–10163 (2015).

Article CAS PubMed PubMed Central Google Scholar

Zhang, L. & Ritter, T. A perspective on late-stage aromatic C–H bond functionalization. J. Am. Chem. Soc. 144, 2399–2414 (2022).

Article CAS PubMed Central Google Scholar

Guillemard, L., Kaplaneris, N., Ackermann, L. & Johansson, M. J. Late-stage C–H functionalization offers new opportunities in drug discovery. Nat. Rev. Chem. 5, 522–545 (2021).

Article CAS PubMed Google Scholar

Thareja, S., Zhu, M., Ji, X. & Wang, B. Boron-based small molecules in disease detection and treatment (2013 -2016). Heterocyl. Commun. 23, 137–153 (2017).

Article CAS Google Scholar

Tamura, H., Yamazaki, H., Sato, H. & Sakaki, S. Iridium-catalyzed borylation of benzene with diboron. Theoretical elucidation of catalytic cycle including unusual iridium(V) intermediate. J. Am. Chem. Soc. 125, 16114–16126 (2003).

Article CAS PubMed Google Scholar

Download references

We thank Centre of Biomedical Research (CBMR) for providing research facility. We thank the High-Performance Computing Center (HPCC) of Nanjing University for doing the numerical calculations in this paper on its blade cluster system. We also thank IIT Kanpur for the X-ray crystallography data collection. This work was supported by SERB-SUPRA grant (SPR/2019/000158) and SERB-CRG grant (CRG/2022/002733). S.D. and S.G. thank CSIR for their SRF and M.M.M.H. thanks SERB–CRG grant for a RA.

Department of Biological & Synthetic Chemistry, Centre of Biomedical Research, SGPGIMS Campus, Raebareli Road, Lucknow, 226014, Uttar Pradesh, India

Saikat Guria, Mirja Md Mahamudul Hassan, Sayan Dey & Buddhadeb Chattopadhyay

State Key Laboratory of Coordination Chemistry, Jiangsu Key Laboratory of Advanced Organic Materials, Chemistry and Biomedicine Innovation Center, School of Chemistry and Chemical Engineering, Nanjing University, 210023, Nanjing, China

Jiawei Ma & Yong Liang

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

B.C. conceived the concept. S.G. developed the ligand. S.G., M.M.M.H., and S.D. performed the experiments. J.M. and Y.L. did the computational calculations. B.C. supervised the project. All authors contributed to writing and proofreading of manuscript and SI.

Correspondence to Yong Liang or Buddhadeb Chattopadhyay.

S.G., M.M.M.H., S.D., and B.C. declare that they have filed an Indian Patent (Patent Application No: 202211036590) and an international patent PCT (PCT/IN2023/050608) based on this work (including the ligand and catalyst).

Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. A peer review file is available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

Guria, S., Hassan, M.M.M., Ma, J. et al. A tautomerized ligand enabled meta selective C–H borylation of phenol. Nat Commun 14, 6906 (2023). https://doi.org/10.1038/s41467-023-42310-6

Download citation

Received: 06 September 2023

Accepted: 06 October 2023

Published: 30 October 2023

DOI: https://doi.org/10.1038/s41467-023-42310-6

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative